HEADPHONE SPEC.
Bluetooth Version: V5.3
Supported: HFP/A2DP/AVRCP
Driver Unit: _10mm
Voltage Rating and Energy Capacity: 3.7V/400mAh
Power Rate: 5mW each earbud
Battery Capacity:2x3.7V/40mAh
Earphone Charge Time: Around 1.5 Hours
Music Playing Time: About 6 Hours
Operating Frequency: 2.402 GHZ-2.480 GHZ
PLAY MUSIC:
1. Tap the touch button once to Pause/Play.
2. Press and hold touch button for 1 second and release it ('L' for previous song, 'R' for next song).
3. Tap the touch button twice to adjust the volume ('L' for decreasing ,'R' for increasing).
VOICE ASSISTANT:
Tap the touch button three times to activate the Siri voice assistant.
CALLING:
1. When a call comes in, short press one of the buttons in order to answer the call or long press it to reject
it.
2. During a phone call, short press the earphone button to end the call and the earphone will resume its
previous working state.
3. During a call, the volume can be controlled via the mobile phone.
4. Stereo mode: both ears have voice.
IMPORTANT:
1. When not connected to any device, the earphones will power off automatically after 5 minutes.
2. On iPhones the battery level of the earphones will be displayed in real time.
3. When the earphones and the charger case are not used for long periods of time, it is recommended to
keep them a dry place and to recharge them at least every 2 months.
4. It is recommended to gently wipe the spring needle and copper column with a cotton swab on a regular
basis to achieve a cleaning effect. Never use liquids to clean the earbuds.
5. Do not use in adverse weather conditions or fully submerge in water and/or any other liquids.